Less wear

Pneumatic conveying of wet, abrasive material

LKAB Minerals, Ltd. have processed mica (also known as common mica or muscovite) at their Derby location in Great Britain since the 1950s. The material is used as a mineral filler for a wide range of applications in the agricultural, building construction, polymers, and paint and coatings industries. One process involves moving large volumes of wet, abrasive mica powder from a wet process to a drying system on the floor above. To improve worker safety in the vicinity of the heated material and overcome abrasive wear, the company replaced mechanical conveyors with a pneumatic conveying system from Flexicon.  

 

Processing muscovite

Mica received at the Derby Works as a fine powder in bulk bags undergoes one of six size reduction processes, depending on its end use. One of these is a wet process, in which water is added to create a hot, sand-like material with high moisture content ideal for use in paints and coatings.

 

The material was originally transported to a drying system on the floor above using a forklift and bucket elevator, and subsequently by a mechanical conveyor and bucket elevator to distance workers from the material. However, components of both systems suffered abrasive wear.

 

Most alternate equipment evaluated either could not be routed as needed, move the moist material efficiently and/or resist abrasive wear. “We looked at a number of conveying systems, but most suppliers considered the material and the restricted routing as too much of a challenge. Ultimately, only Flexicon was willing to take on the project and offer a viable solution,” says Samantha Bucknall, UK Group Performance Manager at LKAB.

 

Pneumatic conveying

“It was a new material for them,” continues Bucknall. “We supplied a batch to the company’s test lab and worked with them to find the best solution.” The resulting automated system is comprised of a 560 l capacity floor hopper, which receives the mica from the wet process via mechanical conveyor. Pneumatic rather than mechanical conveying permitted the most direct material transfer path. A 30 m long, 75 mm diameter PNEUMATI-CON® vacuum line propels the muscovite vertically 11 m to the floor above and around two 90° bends to a 1220 mm diameter filter receiver. The filter receiver separates the muscovite from the conveying air and is sized to hold 800 l of material.

 

The dilute phase vacuum system is powered by a 15 kW positive displacement vacuum pump, at 500 mbar pressure differential. The filter receiver is sized to hold an entire wet mill batch, and includes a level sensor to signal the PLC when the full batch is accumulated and the next batch should be fed to the mill.

 

The filter receiver includes an automatic reverse-pulse jet cleaning system, which dislodges material accumulated on the filter elements to maintain optimal conveying performance, and returns it to the batch to eliminate waste. Bag filters were selected over cartridge filters for more effective release of the sticky material.

 

Material is then transferred from the filter receiver to a drying system, then to any of three sieving stations for separating the product in two particle sizes. Due to greater customer demand for finer mica, two of the three sieving stations produce a 90 µm particle size, while the third produces a coarser 125 µm particle size. 

 

LKAB supplies Mica under the trade name MicaFort in 25 kg bags, 1 t bulk bags, or in bulk tankers.

 

Overcoming conveying challenges

Installation of the new pneumatic system was difficult as it is located in a very tight space,” continues Bucknall. “We experienced a number of challenges during early operations, but Flexicon stayed with us to find solutions as these arose.” One challenge stemmed from mica’s abrasiveness, which ate through one of the elbows within six weeks of operation. “Flexicon suggested we replace the worn bend with a SMART ELBOW® deflection elbow from HammerTek Corporation. This gave us 12 months of operation, almost nine times longer,” says Bucknall.

 

The deflection elbows are designed to minimize wear of the elbow wall. Unlike conventional elbows, which rely on material impact to change direction of material flow, the deflection elbow features a spherical chamber that protrudes just beyond the pathway of the material. A ball of suspended material rotates in the chamber, gently deflecting incoming material around the bend and preventing it from impacting the elbow wall.

 

Overall the project represented a “leap of faith for us as we had not used a pneumatic transfer before and we were not sure how it would handle the wet mica,” concludes Bucknall. “We overcame obstacles and now have a system that performs well and are more than happy with the service provided.”

www.flexicon.com

www.LKABMinerals.com

x

Related articles:

Issue 07-08/2009 Product News

Pneumatic conveying of abrasive material

Gericke delivers under the brand name pneuwork® dense phase conveying technology for abrasive or high temperature products. The construction of the pressure vessel and of its accessories is specially...

more
Issue 04/2019 Aircondos© Bypass System

A further developed pneumatic conveying system

T?he engineers of Ingtec AG, formerly Rotzinger Pneumacon AG, focus, amongst other things, on the technology of a range of different pneumatic conveyor systems. For a large number of applications from...

more
Issue 05/2010

Pneumatic dense phase conveying

Pneumatic dense phase conveying systems for powders and granulates with pressure vessels are favoured against lean phase conveying systems with rotary valves when there is danger of high wear of...

more
Issue 03/2011

Pneumatic conveying systems in ­hygienic design­

The solids solutions group has developed a new pneumatic conveyor in hygienic design complying with EU ordinances and directives (Fig.) and premièred this at Powtech 2010. The stainless steel...

more

Pneumatic conveying systems in ­hygienic design­

The solids solutions group has developed a new pneumatic conveyor in hygienic design complying with EU ordinances and directives (Fig.) and premièred this at Powtech 2010. The stainless steel...

more